The mold temperature machine is composed of water tank, heating and cooling system, power transmission system, liquid level control system, temperature sensor, injection port and other devices.
Product features of high temperature mold temperature machine:
1.Thermostat: using microcomputer automatic calculation type
2. Circulating pump: It adopts the same type of Taiwan "Y.S" pump imported from Europe, which provides high pressure, reduces the temperature difference, and saves electricity.
3. Appearance design: patented separate control box design, completely cut off water vapor, oil and gas heat intrusion, and extend the life of electrical parts.
4. Mechanical and electrical materials: imported parts and components are used, with a service life of 2 million times and a long service life.
5. Circuit design: chain error-proof circuit and practical fault indication, completely protect the mold temperature machine to work stably.
6. Pipeline design: 316 stainless steel integrally formed pipe, fully welded pipe design, acid and alkali resistance, small pipe loss and even heating. And can reduce the pyrolysis reaction of the medium.
The electric heating wire imported from Sweden has a fast temperature rise and decrease temperature and a more stable temperature.
The mold temperature machine is composed of water tank, heating and cooling system, power transmission system, liquid level control system, temperature sensor, injection port and other devices. Normally, the pump in the power transmission system causes the hot fluid to reach the mold from the water tank equipped with a built-in heater and cooler, and then return to the water tank from the mold; the temperature sensor measures the temperature of the hot fluid and transmits the data to the control section. Controller; The controller regulates the temperature of the hot fluid, thereby indirectly regulating the temperature of the mold. If the mold temperature machine is in production, the temperature of the mold exceeds the set value of the controller, the controller will open the solenoid valve to connect the inlet pipe until the temperature of the hot fluid, that is, the temperature of the mold returns to the set value. If the mold temperature is lower than the set value, the controller will turn on the heater.
1. The maximum operating temperature is 40 ℃ -180 ℃, and the temperature control accuracy is ± 1 ℃;
2. The microcomputer touch control operation is simple;
3. Automatic exhaust after starting;
4. Temperature display of outlet and return water;
5. Mold backwater function (optional);
6. Stainless steel pipelines to reduce tube shade and rust;
7. Fault display, maintenance without professionals