Double machine integrated mold

Dual temperature control mold temperature machine refers to a mold temperature machine with two sets of independent heat medium circulation pipelines, which can achieve independent temperature control through two independent temperature control systems, also known as dual machine integrated mold temperature machine.

  • The dual temperature control mold temperature machine refers to a mold temperature machine with two sets of independent heat medium circulation pipelines, which can achieve independent temperature control through two independent temperature control systems, also known as dual machine integrated mold temperature machine. Different temperatures can be set according to actual temperature control requirements. It is suitable for SMC, BMT compression molding, aluminum, magnesium alloy die casting and other production processes that require moving and fixed molds at different temperatures.


    The use of mold temperature machines in the plastics industry is relatively common. Its main functions are: 1. Improve the molding efficiency of the product; 2. Reduce the production of defective products; 3. Improve the appearance of the product and suppress the defects of the product; Reduce energy consumption and save energy


    principle:


    The mold temperature machine is composed of water tank, heating and cooling system, power transmission system, liquid level control system, temperature sensor, injection port and other devices. Normally, the pump in the power transmission system causes the hot fluid to reach the mold from the water tank equipped with a built-in heater and cooler, and then return to the water tank from the mold; the temperature sensor measures the temperature of the hot fluid and transmits the data to the control section. Controller; The controller regulates the temperature of the hot fluid, thereby indirectly regulating the temperature of the mold. If the mold temperature machine is in production, the temperature of the mold exceeds the set value of the controller, the controller will open the solenoid valve to connect the inlet pipe until the temperature of the hot fluid, that is, the temperature of the mold returns to the set value. If the mold temperature is lower than the set value, the controller will turn on the heater.


    Features:


    1. The maximum operating temperature is 40 ℃ -180 ℃, and the temperature control accuracy is ± 1 ℃;


    2. The microcomputer touch control operation is simple;


    3. Automatic exhaust after starting;


    4. Temperature display of outlet and return water;


    5. Mold backwater function (optional);


    6. Stainless steel pipelines to reduce tube shade and rust;


    7. Fault display, maintenance without professionals